Posts
baby monitor 2 way radio image
Arson
will I need a splitter?
also,I have 2 wireless routers if a necessary detail or if the second rourer is necessary at all.
Answer
The broadband modem connects to the router port labeled WAN or Internet via a standard Ethernet patch cable that usually is included with the router.
There are usually 4 LAN ports on the router to connect PCs and other devices via Ethernet cables if need be.
Wireless connections require security configuration to prevent anyone with a WiFi in range of your router from connecting to your network. They could do malicious deeds, such as hack into your network, or just leech off of your Internet bandwidth.
Wireless setup is not too difficult, Just follow the instructions in the router manual or wizard set up program. If you're having problems either pay someone to set it up for you or find a knowledgeable friend to configure it. Once the wireless network settings are configured it's a fairly trouble-free system.
For gaming you would be much better off with a Ethernet connection.
Wireless signals are affected by many factors including wall density, electrical interference, directional antenna range, etc. All of these factors will affect your actual wireless range.
Just because a particular wireless router works good at one location does not guarantee that it will have similar performance in a different location due to variance in the factors listed above.
You should try to centrally locate your wireless router or gateway up high and away from dense walls and electrical and 2.4 GHz wireless interference such as microwave ovens, cordless phones, baby monitors, etc.
By nature, interference in wireless systems causes problems with smooth, consistent speeds.
Excessive latency (ping) can cause your online games to lag. Your ping may be 30 ms and wireless interference could cause it to spike to 200 ms or more.
The best solution would be to use a wired (Ethernet) connection between your gaming device and the router. You can run Ethernet cables up to 100 meters.
MULTIPLE ROUTERS:
Unless you have experience in network configuration, it's not a good idea to use multiple routers unless you turn off the routing functions and use them as wireless access points. Your wireless signals will interfere with each other if they're operating on the same wireless channel. A router also acts as a DHCP server to assign IP addresses, you only want one DHCP service running.
Dynamic Host Configuration Protocol (DHCP) is an auto configuration protocol used on IP networks. Computers that are connected to IP networks must be configured before they can communicate with other computers on the network. DHCP allows a computer to be configured automatically, eliminating the need for intervention by a network administrator. It also provides a central database for keeping track of computers that have been connected to the network. This prevents two computers from accidentally being configured with the same IP address. http://en.wikipedia.org/wiki/Dynamic_Host_Configuration_Protocol
You'll need to manually configure the second router before placing it into service. The IP address needs changed so it doesn't conflict with the first router, the DHCP functions should also be disabled on the second router.
You'll have to connect a PC or laptop directly to the second router via Ethernet and log into it's interface to change it's IP. You'll want to change this to something that doesn't conflict with the first router but is in the same subnet.
Plug a Ethernet cable from LAN port on the first router into one of the LAN ports on the second router, Don't use the second router's WAN port for anything.
Use non overlapping wireless channels such as 1, 6, 11. You can use the same SSID for everything. If you turn of the wireless radio on the first router this step is unnecessary.
For example if you main router has an IP of 192.168.1.1 and it broadcasts on channel 1.
Set your second router as an access point with an IP of 192.168.1.2 and have it broadcast on channel 6.
Although it is not absolutely necessary, I would also reserve the second router's IP in the first router's configuration or set DHCP to assign a range that doesn't include the second router. For example if your devices had the IPs listed above and you wanted to allocate up to 20 DHCP IP addresses you could set the range from 192.168.1.10 to 192.168.1.30. This way in case the second router were powered off for some reason DHCP would not assign 192.168.1.2 to another device which would cause an IP conflict when the second router was powered back up.
Good Luck...
The broadband modem connects to the router port labeled WAN or Internet via a standard Ethernet patch cable that usually is included with the router.
There are usually 4 LAN ports on the router to connect PCs and other devices via Ethernet cables if need be.
Wireless connections require security configuration to prevent anyone with a WiFi in range of your router from connecting to your network. They could do malicious deeds, such as hack into your network, or just leech off of your Internet bandwidth.
Wireless setup is not too difficult, Just follow the instructions in the router manual or wizard set up program. If you're having problems either pay someone to set it up for you or find a knowledgeable friend to configure it. Once the wireless network settings are configured it's a fairly trouble-free system.
For gaming you would be much better off with a Ethernet connection.
Wireless signals are affected by many factors including wall density, electrical interference, directional antenna range, etc. All of these factors will affect your actual wireless range.
Just because a particular wireless router works good at one location does not guarantee that it will have similar performance in a different location due to variance in the factors listed above.
You should try to centrally locate your wireless router or gateway up high and away from dense walls and electrical and 2.4 GHz wireless interference such as microwave ovens, cordless phones, baby monitors, etc.
By nature, interference in wireless systems causes problems with smooth, consistent speeds.
Excessive latency (ping) can cause your online games to lag. Your ping may be 30 ms and wireless interference could cause it to spike to 200 ms or more.
The best solution would be to use a wired (Ethernet) connection between your gaming device and the router. You can run Ethernet cables up to 100 meters.
MULTIPLE ROUTERS:
Unless you have experience in network configuration, it's not a good idea to use multiple routers unless you turn off the routing functions and use them as wireless access points. Your wireless signals will interfere with each other if they're operating on the same wireless channel. A router also acts as a DHCP server to assign IP addresses, you only want one DHCP service running.
Dynamic Host Configuration Protocol (DHCP) is an auto configuration protocol used on IP networks. Computers that are connected to IP networks must be configured before they can communicate with other computers on the network. DHCP allows a computer to be configured automatically, eliminating the need for intervention by a network administrator. It also provides a central database for keeping track of computers that have been connected to the network. This prevents two computers from accidentally being configured with the same IP address. http://en.wikipedia.org/wiki/Dynamic_Host_Configuration_Protocol
You'll need to manually configure the second router before placing it into service. The IP address needs changed so it doesn't conflict with the first router, the DHCP functions should also be disabled on the second router.
You'll have to connect a PC or laptop directly to the second router via Ethernet and log into it's interface to change it's IP. You'll want to change this to something that doesn't conflict with the first router but is in the same subnet.
Plug a Ethernet cable from LAN port on the first router into one of the LAN ports on the second router, Don't use the second router's WAN port for anything.
Use non overlapping wireless channels such as 1, 6, 11. You can use the same SSID for everything. If you turn of the wireless radio on the first router this step is unnecessary.
For example if you main router has an IP of 192.168.1.1 and it broadcasts on channel 1.
Set your second router as an access point with an IP of 192.168.1.2 and have it broadcast on channel 6.
Although it is not absolutely necessary, I would also reserve the second router's IP in the first router's configuration or set DHCP to assign a range that doesn't include the second router. For example if your devices had the IPs listed above and you wanted to allocate up to 20 DHCP IP addresses you could set the range from 192.168.1.10 to 192.168.1.30. This way in case the second router were powered off for some reason DHCP would not assign 192.168.1.2 to another device which would cause an IP conflict when the second router was powered back up.
Good Luck...
Which wireless N router is best in your opinion?
Vladimirs
I have DIR-655 Extreme N router,but whenever I download something wireless signal especially on 2-nd floor gets very weak or loosing signal completely on devices like Roku. I plan on replacing this router for: ASUS RT-N66U Dual-Band Wireless-N900 Gigabit Router. Hopefully it will transmit better signal, what do you think? Previously had experience which was not all the pleasant with Netgear and Linksys router ..of course they were not the top ones,but I am being cautious in my pick now.
Thanks!
Answer
The range of your wireless radio is limited to about a hundred feet. Once you exceed this range you can no longer connect to your wireless router.
Wireless signals are affected by many factors including wall density, electrical interference, directional antenna range, etc.
Depending on the size of your house and the factors listed above, you may need one or more wireless access points or wireless range extenders to cover all areas adequately.
Many wireless connections also experience interference from microwave ovens and cordless phones which interfere with the 2.4 GHz band.
Dual band routers have multiple wireless radios enabling broadcast on the 2.4 GHz and 5 GHz bands simultaneously.
Using the 5 GHz band cuts down on interference from cordless phones and microwave ovens..
Not all devices can use the 5 GHz frequency. Many laptops and other devices only operate at 2.4 GHz. Thus the need for dual band routers.
Just because a particular wireless router works good at one location does not guarantee that it will have similar performance in a different location due to variance in the factors listed above.
If you are getting a new wireless router try to centrally locate it up high and away from dense walls and electrical and 2.4 GHz wireless interference such as microwave ovens, cordless phones, baby monitors, etc.
If you still have a weak wireless signal,there are solutions.
Devices such as wireless extenders can expand your wireless range if need be. http://www.amazon.com/gp/product/B004YAYM06/ref=as_li_ss_tl?ie=UTF8&tag=excharge-20&linkCode=as2&camp=1789&creative=390957&creativeASIN=B004YAYM06
The wireless range extender receives weak wireless signals and repeats them to extend the signal range to greater distances. Some models include 4 Ethernet ports in addition to the wireless radio.
Wireless routers are fairly inexpensive. http://www.amazon.com/s/?_encoding=UTF8&linkCode=ur2&camp=1789&creative=390957&field-keywords=wireless%20router&url=search-alias%3Daps&sprefix=wireless%20ro%2Caps%2C490&tag=excharge-20
As far as the brand goes, the brand is not as important as the model. Some manufacturers release a good model but the next is crap. I would look at the Amazon reviews of models that interest you. Even if you don't buy from Amazon the reviews will tell you a lot about which models to avoid. Look for at least 15 or more reviews with a 4 star or better rating. Read a few and see if they sound like the particular model will work for your application.
Good Luck...
The range of your wireless radio is limited to about a hundred feet. Once you exceed this range you can no longer connect to your wireless router.
Wireless signals are affected by many factors including wall density, electrical interference, directional antenna range, etc.
Depending on the size of your house and the factors listed above, you may need one or more wireless access points or wireless range extenders to cover all areas adequately.
Many wireless connections also experience interference from microwave ovens and cordless phones which interfere with the 2.4 GHz band.
Dual band routers have multiple wireless radios enabling broadcast on the 2.4 GHz and 5 GHz bands simultaneously.
Using the 5 GHz band cuts down on interference from cordless phones and microwave ovens..
Not all devices can use the 5 GHz frequency. Many laptops and other devices only operate at 2.4 GHz. Thus the need for dual band routers.
Just because a particular wireless router works good at one location does not guarantee that it will have similar performance in a different location due to variance in the factors listed above.
If you are getting a new wireless router try to centrally locate it up high and away from dense walls and electrical and 2.4 GHz wireless interference such as microwave ovens, cordless phones, baby monitors, etc.
If you still have a weak wireless signal,there are solutions.
Devices such as wireless extenders can expand your wireless range if need be. http://www.amazon.com/gp/product/B004YAYM06/ref=as_li_ss_tl?ie=UTF8&tag=excharge-20&linkCode=as2&camp=1789&creative=390957&creativeASIN=B004YAYM06
The wireless range extender receives weak wireless signals and repeats them to extend the signal range to greater distances. Some models include 4 Ethernet ports in addition to the wireless radio.
Wireless routers are fairly inexpensive. http://www.amazon.com/s/?_encoding=UTF8&linkCode=ur2&camp=1789&creative=390957&field-keywords=wireless%20router&url=search-alias%3Daps&sprefix=wireless%20ro%2Caps%2C490&tag=excharge-20
As far as the brand goes, the brand is not as important as the model. Some manufacturers release a good model but the next is crap. I would look at the Amazon reviews of models that interest you. Even if you don't buy from Amazon the reviews will tell you a lot about which models to avoid. Look for at least 15 or more reviews with a 4 star or better rating. Read a few and see if they sound like the particular model will work for your application.
Good Luck...
Powered by Yahoo! Answers
No comments:
Post a Comment